UT-GP4106 series single-user ONU is designed for ONU in deferent FTTH solutions by UT-King, The carrierclass FTTH application
provides date service access.
UT-GP4105 series adopts high-performance and low-consumption chips, and supports CTC 3.0
interconnection and interworking standard of China Telecom. With the help of NGBN View NMS, it can provide subscribers with
abundant services, and totally meet the needs of carrier-class FTTH devices

Features• Conform to ITU.984 standard.
> supports Ethernet layer 2 switching and wire-speed forwarding for upstream and downstream services.
> supports frame filtering and suppression, supports standard 802.1q Vlan functions, supports Vlan conversion.
> supports 4094 vlans (802.1q) and dynamic bandwidth allocation (DBA).
> supports QoS, including traffic classification, priority marking, queuing and scheduling, traffic shaping and traffic control, etc.
> supports IGMP Snooping, Ethernet port speed limit, loop detection, and layer isolation.
> supports power outage alarm, remote reset and restart functions
> support factory parameter recovery function, support data encryption
> supports routing, support status detection, and fault escalation

Model No.	UT-GP4106
Interface	1 SC/UPC Port or 1 SC/APC Port; 1 *10/100/1000Mbps RJ45 Port
Chipset	ZTE RTL
Data Rates & Wavelength	Upstream rate up to 1.244 Gbit/s, downstream rate up to 2.488 Gbit/s
Distance	0~ 20Km Max
External Power Supply	DC 12V/0.5A
Dimensions (Length * Width * Height)	132mm×100mm×30mm
Weight (Full-Loaded)	≤0.3kg
Working temperature	0°C～40°C
Storage temperature:	-40°C～70°C
Relative humidity:	10%～90%, non-condensing

Port characteristics:

interface from left to right in turn is:
PON mouth: through optical fiber line source side OLT equipment
RJ45 port: user side equipment through twisted-pair, rate of 10/100/1000 m adaptive
reset button: to restore the factory default, with fine needle hold down hole more than 3 seconds, the system will restore the factory default
power switch, can be in when not in use, closed equipment to save energy
power interface: connect the external power supply

Optical properties:

supports single-fiber bidirectional (single-fiber tridirectional) transmission in WDM technology
interface type: SC/PC
maximum spectral ratio: 1:32
rate: 2.5Gbps/1.25Gbps
transmitting wavelength: 1310 nm
receiving wavelength: 1490 nm
output optical power: -1~+4dBm
reception sensitivity: < -26dbm
The maximum distance between >OLT and ONU is 20 km

Single Port GPON ONU ROHS Gpon Optical Network Terminal Epon ONT

GPON ONU

XPON ONU

GPON OLT

Fiber Optic Fast Connector

Fiber Optic PLC Splitter

Fiber Optic Distribution Box

Fiber Optic Terminal Box

MPO Patch Cord

DWDM MUX DEMUX

Fiber Optic Cable

Fiber Optic Patch Cord

Fiber Optic Tool Kit

Single Port GPON ONU ROHS Gpon Optical Network Terminal Epon ONT

Echolife Single Port Epon ONT 1GE GPON ONU Device Ftth Onu Equipment

Overview

Features

Port characteristics:

Optical properties:

gpon optical network terminal

ont optical network terminal

sfp+ transceiver cisco